Salt 'n Pepper Shaker
by Refic, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I made a remix because I had trouble with the overhang of the rounded bits on the bottom of the main body. So I challenged myself to make a quick draw of this completly from scratch so it is much nicer in ways of overhang. This you can probably print with any settings with a 0,4 nozzle.
The model has 2mm walls, almost all round and therefor you can tune your settings to have a nice time while printing. In Slic3r I have set my perimeter widths to be 0,5. There will be 2 perimeters specified onder the Layers and perimeters, and this results in 4 nice lines that will be printed.
There is not much to it, except the bit where the salt comes out. its an overhang that I couldnt fix. But I am not concerned about this, because it will not impact the shaker.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Salt 'n Pepper Shaker by Refic is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Refic a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Refic would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).