I have a Dirt Devil (Model 086925) upright vacuum cleaner and the upper cord hook broke. I designed and modeled this in Blender and printed it to serve as a functional upper cord hook replacement / upgrade. Why is it an upgrade? The original cord hook was fixed in place and I couldn't quickly turn it downward and pull off the whole cord wrap off. Now I can.
The original cord hook was glued on. I gently hacksawed the broken cord hook off. After printing this it will fit sort of snug over the base, but it will rotate. You can either apply glue and slide it on, or you can use a 3/8" screw to keep it from coming off, thereby allowing you to rotate it to remove the cord.
I hope that someone finds this useful. A lot of time and PLA went into designing this thing. If this design blesses your life in some way, feel free to favor me with a tip as thanks. Gratuities are not required, but are definitely appreciated. You can tip me any amount that you would like here: https://www.paypal.me/brysonjack
Make sure to include a comment telling me which design it is. Thanks in advance.
Monoprice Maker Select V2.1
I used PLA. I over engineered this thing so you could probably get away with a lower infill. It is really strong.