Audix D-Vice drum microphone clip improvement part
by scotttroyer, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This thing replaces the spring-loaded part of the Audix D-vice drum microphone clip. The original part is too small and doesn't clamp onto many drums very well. This replacement part was designed to easily grab onto drum suspension systems.
Be careful not to lose the little metal rods when taking apart the spring mechanism. There is a small metal rod on each end of the spring. The longer one goes on top. Remove the sticky felt from the old part and insert into the new part. The felt dampens the spring, preventing it from making noise. I used an X-acto knife and bent paperclip to disassemble and reassemble the part.
Printed with a Tiko on default settings.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Audix D-Vice drum microphone clip improvement part by scotttroyer is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving scotttroyer a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure scotttroyer would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).