ModiBot was designed for SLS printing in Polymide, but we are working toward making him more printable at home. This is the latest offering of parts pre-configured for printing on desktop home printers. We've modified the designs to include integrated supports, so these items should be printed using 'No Supports' settings.
For best results, print in PLA (or ABS, possible) on high detail settings on any home or hobby printer.
Find out more about building with ModiBot at ModiBot.com
FDMFlexM-F.stl was modified from FDMShoulder.stl by Kidmechano
FDMFlexF-FZ.stl was modified from FDMForeArm.stl by Kidmechano
FDMFlexF-FC.stl was modified from FDMForeArm.stl by Kidmechano
FDMFlexF-FR.stl was modified from FDMForeArm.stl by Kidmechano
FDMFlexF-FL.stl was modified from FDMForeArm.stl by Kidmechano
FDMFlexM-M.stl was modified from FDMTorso.stl by Kidmechano
Changes: The parts were shortened or altered to act as an additional flex joint to be inserted into the elbow or knee (or anywhere, really) and allow for additional range of motion. This will unfortunately alter Mo's proportions.
Note: If at any point Kidmechano wishes these parts removed, they shall be removed. Additionally, if Kidmechano wishes these part to be acquired/absorbed/incorporated into ModiBot Mo, he is free to do so with or without notice or permission, since the original parts these are based on were his designs (and these parts will then be removed due to redundancy).
In all honesty, since Kidmechano made the originals, he could reproduce these in a superior way from his original files, plus keep them updated.
Check out and support ModiBot.
10% but printing solid may increase performance
These parts were designed with pre-built supports to make printing easy.
Most of the tabs quickly break away when bent, but you may want to trim them quickly with a blade for clean edges.