This is a Handlebar clamp for AGM Cree LED Light with 8 LED´s ( 9000 lumen).
The clamp is made for an Handlebar diameter of 25mm.
The Upper clamp part has an integrated strain relief for the power cable of the Lamp.
The Clamps are getting fixed with two M3 Allen screw´s Screws and two M3 Nuts.
The Upper Clamp is getting Screwed to the LED with an M4 Allen Screw.
I´ve printed this with 15% 3D Honeycomb infill.
Preparation of the LED Light
First you have to remove the old round Bottom Holder from the LED Lamp.
You have to remove the Black Foam to get to the screw of the original Holder.
When you have removed the old holder you just need to cut the cable and remove the holder.
Now you can attach the new Clamp you just printed.
Have fun :)