Loading
Reconnnn

Pebble stand with charging

by Reconnnn Jan 9, 2014
Download All Files

Thing Apps Enabled

Please Login to Comment

I had the same issue @Spider_Tech did. I used a sharp blade to cut the points back about half-way, and then the cable "snapped" into place nicely.

I'd like to make a second one, mirrored, that has a recess for the Pebble Time charger... Any chance someone could post something editable? I'd be happy to post the modified stand back here on Thingiverse...

The only issue I've found with this is where the cable is run through. There are the little notches to hold the cable in the channel, but they are too big. I tried to put my cable in there and it took a chunk out of the cable sheath. The cable is roughly about 3mm and it looks like the file only uses a 2mm clearance. Could probably go with 2.5mm and still be good enough to keep the cable in place.

First thing I ever printed. Came out perfect! Looks and Works GREAT! Thanks!

Any chance you will be making a new model of this for the new Pebble Time?

Can you post an editable file? like a Solidworks or iges file?

It should just print with no problems. But I recommend to do some smaller test prints first to make sure your printer is setup as it should.

This is my first print. Is there anything I have to do beforehand? Or just put it in the printer and print it? Are there any settings I have to change. I heard about Cura. Can anyone tell me what settings to use? Like size and stuff. Please and thank you :)

A fine first object!

This is exactly what I've been looking for. Well designed. Perfect fit!