by modelatolyesi, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is another pen plotter. It's on Core-XY system.
Firmware: GRBL-servo; https://github.com/robottini/grbl-servo
Control Software: bCNC; https://github.com/vlachoudis/bCNC (Requires: Python 2; https://www.python.org/downloads/ and Pyserial; https://pypi.python.org/pypi/pyserial)
Generating gCode: Inkscape; https://inkscape.org/en/ and Laser plugin; https://jtechphotonics.com/?page_id=1980
Bill Of Materials:
2x 8mm rod for x axis. (I used 400mm.)
2x 8mm rod for y axis. (I used 340mm.)
2x M8 threaded rod. (x axis lenght + 20mm.)
8x M8 washer.
8x M8 Nut.
9x M3x25 screw.
5x M3x30 screw.
6x M3x15 screw.
12x M3x10 screw.
22x M3 Nut.
32x M3 washer.
1x Ballpen spring.
GT2 Belt (1600mm on my machine)
2x Nema 17 Step motor.
2x GT2 Pulley (I used 20 tooth)
8x Lineer bearing LM8UU or LME8UU.
2x Lineer bearing LM6UU.
2x 6mmx60mm rod.
10x 623zz bearing.
30x 2.5x100 Cable Ties.
Arduino UNO R3. (I used cheap clone.)
2x A4988 Stepper driver.
Servo extension cable.
Stepper motor cables.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
CoreXY_Plotter by modelatolyesi is licensed under the GNU - GPL license.
What does this mean?
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving modelatolyesi a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure modelatolyesi would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).