Nintendo Switch Arcade Cabinet (Laser Cut)
Wanted to try my hand at a mini Nintendo Switch Cabinet for Maker Faire. Mocked this up. Will be iterating while I wait for Maker Faire to arrive :D
Uses 3/16" material. I have been using Elmers Foamboard for my prototypes. It's about ~$3.00 for a 20"x30" board from Target / Walmart and it cuts great on a laser cutter.
May 15th 2017 - v.0.1.5 - Added back brace and front lip to keep Switch in place without having to use kickstand.
June 1st 2017 - v.0.1.6 - Made some areas a little taller to lessen the gaps. Cabinet survived a trip to Megacon 2017.
June 17th 2017 - Added updated SVG with correct DPI. AI file is fine, but SVG was set to wrong DPI causing a 20% size reduction.
Laser Cut Files
5mm Wood or 3/16" Foam Board thickness required for items to fit together.
Piece Sizes (Inches)
7.4444 x 8.606
7.4375 x 4.1339
7.4514 x 1.977
7.0866 x 0.6481
7.4526 x 3.3252
7.4549 x 1.977
7.7643 x 10.3895
4.8819 x 7.4514