Finally fixed my printer & it is now running my latest redesign. yeah!! 01-2019
03-2019 - Bad news I think I have some layer shifting possibly bad belt somewhere
2019 NO MORE GANTRY ROD REMOVAL FOR GANTRY BASE & DUCT!!!!!
Will need to print the fan duct & E3D clamp & IR sensor bracket in PETG or PC.
Will need at least (2) 3mm square nuts ( Could use up to 10 square nuts in certain configurations.)
Will need at least (4 ) 40mm long 3mm screws & (2) 14mm long screws, (allen heads recommended.)
3/4" surgical tubing I got from eBay.
90mm fan got from Amazon.
Duet Wifi setup got from Filastruder.
I have plans to use the knock off Drylin bearings I found on Aliexpress They require a different gantry block because they have to be compressed to work correctly or so says the research I have done. so the bearing diameter hole is decreased to 11.9mm from the original 12.2mm
PLEASE CONSIDER DONATING $5 Thru Paypal firstname.lastname@example.org