Raspberry Pi GPIO Header Soldering Jig
by PiMinister, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This soldering jig was originally designed to help soldering GPIO headers (male or female) onto a Raspberry Pi Zero.
It's been adapted slightly so that it can also be used when soldering male or female headers onto other similar size (but thicker) boards such as HATs or pHATs.
Since originally publishing this jig, I have updated the design to allow it to also be used with 90 degree male headers.
The Version 2 stl file will therefore work with male and female straight GPIO headers, and 90 degree male headers.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Raspberry Pi GPIO Header Soldering Jig by PiMinister is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving PiMinister a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure PiMinister would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).