Cable clamp OpenSCAD parametric
by Inhumierer, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Made this for a friend. Simple design, almost everything is resizeable to fill your needs.
V1.1: Adjusted the cable inlet angle so the cables snap in easier.
V2: Now I understood how this thing works ;-) Just measure the diameter of your cable and count the loops you want it to hold, that's all. For several reasons you should add a small value to your diameter to make the cable snap in easy but don't fall out too easy. Depends on the diameter, material used, and your printer.
If you have something with 2 different cables attached, like my notebook power supply at the photo, you may combine 2 different clips.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Cable clamp OpenSCAD parametric by Inhumierer is licensed under the GNU - GPL license.
What does this mean?
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Inhumierer a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Inhumierer would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).