Open frame for replacement of the budget tiny whoop with 6mm motors.
The stock chassis weights 3.82 grams, my v1.0 chassis weights 2.35 grams, the v2.00 is 2.75 grams. The v3.0 is still printing ;)
ADDED v2.0 and v3.0: one with support for 4 holes flight control (inductrix style) and one without them but with JJRC EF-01 camera support for FPV.
Feel free to leave comments if you have any ideas on additions or corrections.
Tried it only on the furibee F36, it needs some work for sure but it works flawlessly.
WARNING: You'll need to de-solder the original battery connector and put it on top and de-solder all the motors to detach them from the original frame.
As always: If some pieces need some work please let me know, to solve them you can lightly cook the piece to soften it and correct small imperfection in quotes, for example if a screw seems too large for an hole. Then tell me the problem in the comments below and I will try to apply corrections.
v2.0 in design process, if you have some tips please tell me in the comments ;)
IF YOU LIKE MY DESIGN, FEEL FREE TO CLICK THE "LEAVE A TIP" BUTTON ON MY PROFILE TO ENCOURAGE ME TO CONTINUE DESIGN ANET A8 THINGS.
Print it very slow and add a brim if you're concerned about it detaching from the bed.
It has two 1mm holes for the screws so you want to be very slow with them.