Loading
Lee-R

Anet A8 Push button guide

by Lee-R Apr 14, 2017
Download All Files

Thing Apps Enabled

Please Login to Comment

It is a bit too big for my a8 from December, but poster putty holds it in place nicely (luckily had some lying around). I love the look and feel of it though!

My buttons are 6mm and my print came out to 6.5mm, but again it worked fine with some poster putty. One of my buttons did not print out very well (gunk on my glass)... could you upload a single version which would allow me and others to print and test/adjust. that way you could print out one and shrink or grow the print if needed? Thanks for the awesome design!

I've uploaded both the STL and the 123dx file. Glad you liked it. One of my buttons is held on with blue-tac as well.

Outside diameter is ok. Inside diameter is too small. Doesn't fit over button.

I wonder if they are using different buttons now?
If you measure the button diameter I'll make a new model with a larger inside diameter.

If you could let me know which measurement is wrong, I'll make a new model and add the STL to the files.