Plastic Header Pins
by PuZZleDucK, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Print your own header pin plugs and then use leftover component leads or header pins (or paper clips if your desperate) to create your own plugs... OpenSCAD code included, but not for the faint of heart.
Pin spacings should mate well with most breadboards/sockets/arduino/etc
The three header pin version aligns pins with every second breadboard hole. The four pin version meets every hole, but is difficult to print.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Plastic Header Pins by PuZZleDucK is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving PuZZleDucK a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure PuZZleDucK would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).