Now you can have your own BF1 Limpet Charge to throw at your friends and run away! I designed it to be 7.25" in diameter for the body so anyone with an 8" or larger printer can make this without scaling. The parts will need to be bonded together with some form of adhesive; use whatever you like. Clear silicone and super glue work well. For extra coolness you can put some magnets on the bottom and stick it on the fridge.
Print the quantity of parts as follows:
1x Limpet Body - Army Green
1x Key - Metallic
1x Base Center - Metallic
1x Base Magnet - Black
4x Handle Base - Army Green
4x Handle Radius Connector - Metallic
2x Handle Grip - Wood Fill
I used 75% infill on the handle base and handle grip; the rest of the parts I used 10% infill.
Use a brim when printing the handle base and handle grip for better adhesion.
Only the Base Magnet will need support.
All of the components should print as they are imported.