Saint Dionysius Reliquary - Hellboy
by McKrats, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
...straight from the Vatican.
This is a recreation of the reliquary Hellboy hands to Abe before he dives in to a whole heap of trouble. The clear tube is a section of plastic test-tube.
This has been designed so no supports are required.
Print the parts at a nice high resolution. I vapour smoothed the pieces, which worked really well. The top needs to be glued to the lid.
The clear tube is about 60mm/2.5" cut from a 25 x 140mm (40ml) plastic test tube (see picture below).
To finish the parts were sprayed gold, roughly brushed with black acrylic and wiped clean. The bone was painted using acrylic paints to look like bone.
How I Designed This
Modelled in Sketchup, mesh cleaned up in Silo 3D then the detail added in Sculptris.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Saint Dionysius Reliquary - Hellboy by McKrats is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving McKrats a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure McKrats would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).