Nut Fidget Spinner 2
by Cycon, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I designed this myself, tho someone else may have made one similar, but i made this without influence from any other designs(Other than the round one from the 3D Printing Nerd)
NOTE: Nut size is 1/2! so 19mm(Flat edge to flat edge)x22mm(Corner to Corner)x12mm(ID)
NOTE: If nut or bearing holes are too small, look at my other fidget spinner for directions(or simply file it down)
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Nut Fidget Spinner 2 by Cycon is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving Cycon a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Cycon would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).