I was asked if I could make the Lawbringer poleaxe from the For Honor video game by dylanwhopper on my Great Axe project. http://www.thingiverse.com/thing:2181579
I've designed this to fit around a 1 foot 1" wooden dowel for all the top pieces and a 1 3/8" wooden dowel for the body. The length of the body is up to you but the in game model appears to be around 6 feet tall. You will have to adjust how the models are situated in your slicer of choice.
Print 2 copies of all the langet pieces and 6 copies of all the screws. The larger ones go on the axe head and the bottom langets. The smaller ones go on the top langets and the connector piece.
All the pieces should be glued together with either superglue or an epoxy.
EDIT 4/26/17 - I went a little overkill with the tolerances so now the cylinder pieces that touch the wood should fit much more snug. Also added A combined version of the butt pieces.
All of the larger pieces can be printed at .2mm resolution with no supports. (you can use them if you want)
The screws should be printed at the highest setting you can do as they are smaller pieces and detail is always nice.