Wanhao Duplicator 7 (D7) Raised Foot Pad
by wisar, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Idea from video by Spyker Workshop to give the fan under the printer a little easier access to airflow.
This update is for a foot pad that allows for leveling of the printer. As shown in the photos you will need some additional hardware. M6 Bolts and Nuts. Lengths of 20-25 or even 30mm will work. Ideally a half nut to use as the brake. Also ideally a hex head bolt though you can use a nut as shown on a round head bolt.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Wanhao Duplicator 7 (D7) Raised Foot Pad by wisar is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving wisar a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure wisar would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).