Liquid Fuel Bottle Feet
by walter, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Fuel bottle feet, to help stabilize a whitegas fuel canister on rough surfaces. Printed with a 0.5mm extrusion width in vase mode, using TPU filament. The size will probably need to be adjusted if using a different extrusion width or a rigid filament. I'm using with a Soto fuel canister, but most other whitegas canisters should have the same diameter. Printed with Sainsmart Transparent TPU filaments*.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Liquid Fuel Bottle Feet by walter is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving walter a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure walter would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).