USB Flash Drive / Pendrive Case Keyring
by Ignacio_Merino, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a one piece pen-drive enclose case for Sony 8gb USB, might apply to other models.
The print needs to be stopped around Z=5,5 so as the flashdrive board can be placed inside the case. Once you that done, you can resume the print and the PCB will be embedded in the case.
I´ve printed in 0,3mm layers without support but i ended up with a bit lack of resolution so i would recommend printing it at 0,1-0,15mm layers.
I recommend 0,1mm layers since it´s a small part and the result might be much better.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
USB Flash Drive / Pendrive Case Keyring by Ignacio_Merino is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Ignacio_Merino a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Ignacio_Merino would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).