1/4 inch NPT to Loc-line
by pquijal, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This facilitates connecting an air hose to a flexible, segmented hose whilst anchoring the two in place with four small wood screws.
Make the ball-end hose connector smooth with some sandpaper.
MakerGeeks Raptor Series PLA - Battleship Gray (affiliate link)
3 (1.2 mm)
3 (0.6 mm)
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
1/4 inch NPT to Loc-line by pquijal is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving pquijal a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure pquijal would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).