by DataDisrupter, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I did some small edits to the original nerf scope by MartijnRoozendaal (linked as the remixed item), to be easier to print, and better fit my Nerf Longstrike CS-6 specifically. I printed the pieces specifically in this orientation, so they would be strong enough to survive the wear and tear of being put on and removed from the toy. To make the prints come together into one object, I solvent weld them together using acetone as this was an ABS print, but left the knobs "free" so they still maintain "functionality" of rotating around the central axis. Be careful when inserting the knobs into the central piece, as the stress caused by the pins could be enough to split your print in half though.
Uniform print speed (of 40 mm/s)
Multi loop skirt (25 loops)
Hot end temperature 245 deg C
Print bed temperature 105 deg C
Travel speed 100 mm/s
Extrusion width 0.4 mm with a 0.4 mm nozzle
First layer 130%
Layer height 0.3 mm
Wall thickness: 1.5mm
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Nerf Scope by DataDisrupter is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving DataDisrupter a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure DataDisrupter would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).