Handle for the Ultimaker 3D printer (or other things). Idea by Martijn (http://www.thingiverse.com/Martijn).
The version I printed didnt have all the edges chamfered (ouch, sharp!) and didn't include the Ultimaker text, so that has not been tested yet.
It works like a charm, allowing you to carry your Ultimaker wherever. Of course I am not responsible for any damage (falling UM's) caused by using this!
Use handle_straight if you want a straight bottom edge.
Place with text facing up and aligned diagonally in the print area. I used PLA with 25% infill, sliced by Cura. The print took about 1,5 hours on 100 mm/s.
After printing bolt it in place of the Z-axis covers. This will require longer bolts than are normally fitted there - I recommend 20mm.