Storage for Dark Souls the Boardgame
by entropy86, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Token and card storage for the Dark souls Boardgame. Lets you have all the tokens and cards nicely organised in the box along with the models. Adds less than 1cm to the height of the lid, there are 2 deeper sections and 2 shallower sections, these correspond to the large and small model boxes.
I recommend using a brim to ensure the long edges don't warp while printing.
Each section takes about 6-8 hours to print. I used 2 shells and 3 top and bottom layers. This could probably be reduced but I wanted it solid.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Storage for Dark Souls the Boardgame by entropy86 is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving entropy86 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure entropy86 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).