OpenRC Calibration Cube
by barspin, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Before you start printing the OpenRC F1 that uses pockets to fit the small M3 nuts and see if you need to calibrate your printer for them to fit.
Even if this comes out good, make sure you test the m3 nuts in the first 3dprinted part aswell to be sure.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
OpenRC Calibration Cube by barspin is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving barspin a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure barspin would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).