QAV-SKITZO GoPro Session 5 20°, 25° and 30° Mount

by oxivanisher, published

QAV-SKITZO GoPro Session 5 20°, 25° and 30° Mount by oxivanisher May 6, 2017
0 Share
Download All Files

Thing Apps Enabled

Order This Printed View All Apps


Design Tools

Fusion 360

Liked By

View All

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.

Print Thing Tag

Thing Statistics

1209Views 249Downloads Found in R/C Vehicles


This Object lets you mount a GoPro Session 5 (and probably 4) on the Lumenier QAV-Skitzo Dark Matter with an angle of 20°, 25° and 30° degrees.

Printed in TPU (NinjaFlex) for maximum durability and also reducing vibrations in the recorded video.

To protect your camera, you can use this thing: https://www.thingiverse.com/thing:2516805

Other things for the Lumenier QAV-Skitzo Dark Matter:

These mounts have been updated so that the secondary button of the camera can be pressed. Also the first 20° and 25° mounts where the same. This is fixed now.

Print Settings

Printer Brand:












Supports yes or no depends on the print quality your printer/material is able to deliver. You probably have to test it out.

More from R/C Vehicles

view more

All Apps

Upgrade this Thing with Thingiverse Apps

Print Fulfilment

Order a print of this Thing

3D print your favourite design with NinjaPrototype, a professional 3D manufacture with consistent quality and speed.

App Info Launch App

Any chance you can design one of these where the GoPro is fully enclosed?

Hey wickedneuron

My cam mounts are designed to be also printed in semi-flex. With semi-flex, it would be impossible to add the camera into the mount. To protect the camera anyways, I designed this thing: https://www.thingiverse.com/thing:2516805

I just forgot to upload it. ;)

GoPro Session Protector

Thank you for sharing the top! I was going to print this in ninjaflex. I am currently using a generic gopro mount that I put on some foam and some moongel then zip tie down, but it moves a little much. Your design looks like it would be more stable and with some tuning, I would hopefully be able to get vibes out. I just worry about a velcro strap not being enough to hold the cam down and then blooop off goes a tiny cube into a bunch of grass somewhere. I just started with 3d printing so once I figure out design software, I may do something like yours that I can secure to the top plate as well but with an enclosed section for the gopro. But at this point, I'm messing up my pei sheet on the printer. I'll have to replace that before learning complex software. Thanks again!

File has some rough topology on it, does not slice well. Ran through netfabb with no change.

I had no problem printing it. But I just added a newer (and updated) version of this file (and also a 20° and 25° version). Hopefully these files are better.

Hi, whats the difference between the v2 and the 2 of 20 and 25 versions?

Hey, this is a good question, than you.

I realized that I had an error with the files. Now the files have the correct degrees and all of them have the hole at the back to expose the menu button of the session.


I se you posted the new ones, are they in 3 difrent degred angle ?

Yes, this is correct. 20, 25 and 30 ° (degrees)

Okey, the file explane name is V2 for one of them:)

You have to re-download the files. The new ones have correct names (and all of them are now V2).