These are some additional STLs for the Hypercube Evolution, that might come in handy.
Original credit goes to Scott, who designed this greatly improved version of the Hypercube (by Tech2C).
Update 13/05 : I added the MK8 extruder mount, that I customized. This is for a full metal MK8 kit, that you can buy on Ebay like this one http://www.ebay.de/itm/MK8-Extruder-Aluminium-Frame-Halterung-3D-Drucker-RepRap-Makerbot-Mendel-DIY-Kit-/182169630479?hash=item2a6a27f70f:g:UKEAAOSw8HBZEcdJ.
I also added a custom bed mount (You need 4 pieces of this) in order to mount a 213 x 213 mm standard MK3 hotbed. This you can use in any angle on the bed frame.
Update 14/05 : Since the DoubleZ Railbrackets are no longer needed, I removed them. Get the updated version 1.1 from Scotts Page.
I made a adjustable mechanical endstop (bracket and screwholder) for the Hypercube evolution. The inductive sensor from the BOM does not work with a glass bed, and I think anyway, that because of the rock solid construction of the bed holder, a z-probe not needed. The bracket is mounted on the frame and the screwholder on the bed holder.
(original design of the screwholder and the bracket by spauda01, designer of the D-Bot)
I uploaded modified versions of the Left/Right Stepper and Idler Mounts in order to fit the european version of the internal L-Type brackets. The position of the upper holes of these is different than the asian version.
And I also uploaded an enhanced version of the Hypercube EVO Configuration EXCEL sheet. This now includes a BOM European Version.
Update 25/05 :
I made a modified hotend mount for the TITAN AERO Geared Extruder, since I will go with this on my EVO.
As for the layer fan, this https://www.thingiverse.com/thing:2240359 can be used.
Update 02/06 :
I made a mount for the E3D Chimera/Cyclops Dual Extruder Mount. This one works with the china clones as well (larger bowden clips)
I made a 40mm Fan duct for part cooling to replace that loud radial fan. I used a 40mm Noctua very quiet fan, but any 40mm will do.
Also included is a modified version of the hotend mount to accomodate the 40mm Fanduct
I recreated a semi-circular fan duct for part cooling. In addition I created a part cooling duct, that is based on the principle of the Mistral fan duct from A8
I put new versions of the XY Stepper and Idler Mounts online, where the longhole is perfectionised. Thanks to Oliver Johanndrees for help.
Added a visual printer model for Simplify 3D.
Added new versions of the European Idler and Stepper Mounts for X/Y
Added 2 new Z-Brackets for 1204 Ball Screw Rods, one small and one big version.
Added 2 variable Bed Brackets. One short from 15-30mm, the other from 30-34mm
Added a Nimble E3D Mount with BLTouch Adapter for the Brunos (Nedallive) X-Carriage
Added a coupler for Z Motors to 1204 Ball Screw Rods
Added European Versions of Yves XY enforced Stepper Mounts
Uploaded a new version of the 1204 Ball Screw Z-Bracket, where the opening is exactly
inline with the stepper bracket.
Added european versions of Brunos excellent renforced XY Idler/Pulley Mounts
Added a Z-Bearing_Holder for LM12LUU / LMUW12 LONG version instead of 2 bearings.