Loading

Twisted Street on a Device

by shivinteger, published

Twisted Street on a Device by shivinteger May 10, 2017

Summary

FAQ: http://www.thingiverse.com/shivinteger/about

[>>>] Generating Attributions log:

[0] Thing Title : Antique Car
[0] Thing URL : http://www.thingiverse.com/thing:6197
[0] Thing Author : RobbinsvilleHighSchool
[0] Thing Licence : Attribution - Non-Commercial - Share Alike

[1] Thing Title : Weighted Companion Cube Computer Case
[1] Thing URL : http://www.thingiverse.com/thing:8441
[1] Thing Author : MotorOn
[1] Thing Licence : Attribution - Non-Commercial - Share Alike

[2] Thing Title : Gears!Gears!Gears! to Tinkertoy (uck-02f07m)
[2] Thing URL : http://www.thingiverse.com/thing:15957
[2] Thing Author : uck
[2] Thing Licence : Attribution - Non-Commercial - Share Alike

[3] Thing Title : Zebra Paper Bird
[3] Thing URL : http://www.thingiverse.com/thing:22568
[3] Thing Author : aubenc
[3] Thing Licence : Attribution - Non-Commercial - Share Alike

[4] Thing Title : Brass Musician's Embouchure Training Device
[4] Thing URL : http://www.thingiverse.com/thing:84096
[4] Thing Author : Cameron
[4] Thing Licence : Attribution - Non-Commercial - Share Alike

[5] Thing Title : Twisted Napkin Ring
[5] Thing URL : http://www.thingiverse.com/thing:575405
[5] Thing Author : neobobkrause
[5] Thing Licence : Attribution - Non-Commercial - Share Alike

[6] Thing Title : Pocket-Tactics: The Lost Agency (Series 1)
[6] Thing URL : http://www.thingiverse.com/thing:662490
[6] Thing Author : dutchmogul
[6] Thing Licence : Attribution - Non-Commercial - Share Alike

[7] Thing Title : Zoophorus by Antelami (tile 51) (Italy): goose
[7] Thing URL : http://www.thingiverse.com/thing:730671
[7] Thing Author : 3DArcheoLab
[7] Thing Licence : Attribution - Non-Commercial - Share Alike

[8] Thing Title : Elf Street Mage Bust
[8] Thing URL : http://www.thingiverse.com/thing:763154
[8] Thing Author : dutchmogul
[8] Thing Licence : Attribution - Non-Commercial - Share Alike

[9] Thing Title : Waterwheel
[9] Thing URL : http://www.thingiverse.com/thing:779540
[9] Thing Author : sharkycreations
[9] Thing Licence : Attribution - Non-Commercial - Share Alike

[10] Thing Title : Lee's Tape Protection-Cap (Blue Tape and others)
[10] Thing URL : http://www.thingiverse.com/thing:1254138
[10] Thing Author : mlbuxbaum
[10] Thing Licence : Attribution - Non-Commercial - Share Alike

[11] Thing Title : Ergonomic duster
[11] Thing URL : http://www.thingiverse.com/thing:1298593
[11] Thing Author : harddrv1
[11] Thing Licence : Attribution - Non-Commercial - Share Alike

[12] Thing Title : Rubiks Cube mod piers
[12] Thing URL : http://www.thingiverse.com/thing:1345732
[12] Thing Author : percy_b
[12] Thing Licence : Attribution - Non-Commercial - Share Alike

[13] Thing Title : Micro Garden Holder
[13] Thing URL : http://www.thingiverse.com/thing:1493984
[13] Thing Author : Regis3D
[13] Thing Licence : Attribution - Non-Commercial - Share Alike

[+] Attributions logged

[+] Getting object #0
[<] Importing : downloads/779540/waterwheelpart1.stl
[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: 0.00%, F: 0.00%
[+] Preparing : Waterwheelpart1

[+] Getting object #1
[<] Importing : downloads/1254138/tape-cap_print20160108-25899-1ol3mgr-0.stl
[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: -0.06%, F: -0.08%
[+] Preparing : Tape-Cap Print20160108-25899-1Ol3Mgr-0
[+] Rotating object = Tape-Cap Print20160108-25899-1Ol3Mgr-0
[!] Volume difference is 1020.69%
[+] Scaled Tape-Cap Print20160108-25899-1Ol3Mgr-0 by 99.32%
[+] Created duplicate : Waterwheelpart1.001
[+] Staging objects : BOTH_FRONT
[+] Union between : Waterwheelpart1.001 & Tape-Cap Print20160108-25899-1Ol3Mgr-0
[!] Number of faces #1 : 1456 + number of faces #2 : 4820 = 6276
[!] Number of faces of union: 6330
[+] Cleaning non manifold
[!] Total removed V: -0.03%, E: -0.04%, F: 0.00%

[+] Getting object #2
[<] Importing : downloads/1298593/ergonomicduster.stl
[+] Cleaning non manifold
[!] Total removed V: -0.60%, E: -0.48%, F: -0.24%
[+] Preparing : Ergonomicduster
[+] Rotating object = Ergonomicduster
[!] Volume difference is 17.27%
[+] Created duplicate : Waterwheelpart1.000
[+] Staging objects : BOTH_RIGHT
[+] Union between : Waterwheelpart1.000 & Ergonomicduster
[!] Number of faces #1 : 6330 + number of faces #2 : 21086 = 27416
[!] Number of faces of union: 27467
[+] Cleaning non manifold
[!] Total removed V: -0.01%, E: -0.00%, F: 0.00%

[+] Getting object #3
[<] Importing : downloads/405554/Fan_Concentrator.stl
[+] Cleaning non manifold
[!] Total removed V: -75.85%, E: -77.02%, F: -77.10%
[-] Object is malformed
[+] Deleting bad source : downloads/405554/Fan_Concentrator.stl

[+] Getting object #3
[<] Importing : downloads/1493984/MicroGardenHolder_LukaPusic.stl
[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: -0.01%, F: -0.02%
[+] Preparing : MicroGardenHolder LukaPusic
[+] Rotating object = MicroGardenHolder LukaPusic
[!] Volume difference is 44.53%
[+] Created duplicate : Waterwheelpart1.001
[+] Staging objects : ON_RIGHT
[+] Union between : Waterwheelpart1.001 & MicroGardenHolder LukaPusic
[!] Number of faces #1 : 27467 + number of faces #2 : 9118 = 36585
[!] Number of faces of union: 36176
[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: 0.00%, F: 0.00%

[+] Getting object #4
[+] No STL in that folder

[+] Getting object #4
[<] Importing : downloads/84096/PETE.stl
[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: 0.00%, F: 0.00%
[+] Preparing : PETE
[+] Rotating object = PETE
[!] Volume difference is 1.32%
[+] Scaled PETE by 196.17%
[+] Created duplicate : Waterwheelpart1.000
[+] Staging objects : ON_BOTTOM
[+] Union between : Waterwheelpart1.000 & PETE
[!] Number of faces #1 : 36176 + number of faces #2 : 45016 = 81192
[!] Number of faces of union: 80967
[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: 0.00%, F: 0.00%

[+] Getting object #5
[<] Importing : downloads/575405/TwistedNapkinRing.stl
[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: 0.00%, F: 0.00%
[+] Preparing : TwistedNapkinRing
[+] Rotating object = TwistedNapkinRing
[!] Volume difference is 4.17%
[+] Scaled TwistedNapkinRing by 133.86%
[+] Created duplicate : Waterwheelpart1.001
[+] Staging objects : BOTH_BACK
[+] Union between : Waterwheelpart1.001 & TwistedNapkinRing
[!] Number of faces #1 : 80967 + number of faces #2 : 18918 = 99885
[!] Number of faces of union: 93489
[+] Cleaning non manifold
[!] Total removed V: -0.00%, E: -0.00%, F: -0.00%

[+] Getting object #6
[<] Importing : downloads/662490/Omnisphere.stl
[+] Cleaning non manifold
[!] Total removed V: -0.30%, E: -0.37%, F: -0.40%
[+] Preparing : Omnisphere
[+] Rotating object = Omnisphere.009
[!] Volume difference is 0.00%
[+] Scaled Omnisphere.009 by 5811.93%
[+] Created duplicate : Waterwheelpart1.000
[+] Staging objects : BOTH_FRONT
[+] Union between : Waterwheelpart1.000 & Omnisphere.009
[!] Number of faces #1 : 93487 + number of faces #2 : 68 = 93555
[!] Number of faces of union: 93289
[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: 0.00%, F: 0.00%

[+] Getting object #7
[<] Importing : downloads/763154/ElfBust.stl
[+] Cleaning non manifold
[!] Total removed V: -0.02%, E: -0.03%, F: -0.02%
[+] Preparing : ElfBust
[+] Reducing the number of polygons by 55.07%
[+] Rotating object = ElfBust
[!] Volume difference is 1.24%
[+] Scaled ElfBust by 200.42%
[+] Created duplicate : Waterwheelpart1.001
[+] Staging objects : ON_TOP
[+] Union between : Waterwheelpart1.001 & ElfBust
[!] Number of faces #1 : 93289 + number of faces #2 : 100004 = 193293
[!] Number of faces of union: 193276
[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: 0.00%, F: 0.00%

[+] Getting object #8
[<] Importing : downloads/22568/zBird_1.8_1.stl
[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: -0.20%, F: -0.30%
[+] Preparing : zBird 1.8 1
[+] Rotating object = zBird 1.8 1.011
[!] Volume difference is 0.00%
[+] Scaled zBird 1.8 1.011 by 1360.68%
[+] Created duplicate : Waterwheelpart1.000
[+] Staging objects : BOTH_BACK
[+] Union between : Waterwheelpart1.000 & zBird 1.8 1.011
[!] Number of faces #1 : 193276 + number of faces #2 : 76 = 193352
[!] Number of faces of union: 189472
[+] Cleaning non manifold
[!] Total removed V: -0.00%, E: -0.00%, F: 0.00%

[+] Getting object #9
[<] Importing : downloads/151841/icosahedron2.STL
[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: 0.00%, F: 0.00%
[+] Preparing : icosahedron2
[+] Rotating object = icosahedron2.001
[!] Volume difference is 3.81%
[+] Scaled icosahedron2.001 by 137.89%
[+] Created duplicate : Waterwheelpart1.001
[+] Staging objects : BOTH_TOP
[+] Union between : Waterwheelpart1.001 & icosahedron2.001
[!] Number of faces #1 : 189472 + number of faces #2 : 20 = 189492
[!] Number of faces of union: 125142
[+] Cleaning non manifold
[!] Total removed V: -6.07%, E: -5.41%, F: -5.04%
[-] Object is malformed
[-] Union did not work well. Discarding object.

[+] Getting object #10
[<] Importing : downloads/6197/Car1.stl
[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: -0.18%, F: -0.27%
[+] Preparing : Car1
[+] Rotating object = Car1
[!] Volume difference is 0.00%
[+] Scaled Car1 by 5216.82%
[+] Created duplicate : Waterwheelpart1.001
[+] Staging objects : ON_RIGHT
[+] Union between : Waterwheelpart1.001 & Car1
[!] Number of faces #1 : 189472 + number of faces #2 : 12923 = 202395
[!] Number of faces of union: 202377
[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: 0.00%, F: 0.00%

[+] Getting object #11
[<] Importing : downloads/1345732/rubikcustomizer_1620160216-25888-1l8b0kl-0.stl
[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: 0.00%, F: 0.00%
[+] Preparing : Rubikcustomizer 1620160216-25888-1L8B0Kl-0
[+] Rotating object = Rubikcustomizer 1620160216-25888-1L8B0Kl-0
[!] Volume difference is 0.11%
[+] Scaled Rubikcustomizer 1620160216-25888-1L8B0Kl-0 by 447.66%
[+] Created duplicate : Waterwheelpart1.000
[+] Staging objects : ON_FRONT
[+] Union between : Waterwheelpart1.000 & Rubikcustomizer 1620160216-25888-1L8B0Kl-0
[!] Number of faces #1 : 202377 + number of faces #2 : 258 = 202635
[!] Number of faces of union: 201539
[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: 0.00%, F: 0.00%

[+] Getting object #12
[<] Importing : downloads/15957/uck-02f07m.stl
[+] Cleaning non manifold
[!] Total removed V: -0.11%, E: -0.11%, F: -0.11%
[+] Preparing : Uck-02F07M
[+] Rotating object = Uck-02F07M
[!] Volume difference is 0.00%
[+] Scaled Uck-02F07M by 8283.38%
[+] Created duplicate : Waterwheelpart1.001
[+] Staging objects : BOTH_FRONT
[+] Union between : Waterwheelpart1.001 & Uck-02F07M
[!] Number of faces #1 : 201539 + number of faces #2 : 25364 = 226903
[!] Number of faces of union: 223981
[+] Cleaning non manifold
[!] Total removed V: -0.00%, E: -0.00%, F: 0.00%

[+] Getting object #13
[<] Importing : downloads/14867/earphone_holder.stl
[+] Cleaning non manifold
[!] Total removed V: -0.10%, E: -1.22%, F: -1.78%
[-] Object is malformed
[+] Deleting bad source : downloads/14867/earphone_holder.stl

[+] Getting object #13
[<] Importing : downloads/1367774/dr_best_filamenbremse_zahnbustenhalter.stl
[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: 0.00%, F: 0.00%
[+] Preparing : Dr Best Filamenbremse Zahnbustenhalter
[+] Rotating object = Dr Best Filamenbremse Zahnbustenhalter
[!] Volume difference is 0.06%
[+] Scaled Dr Best Filamenbremse Zahnbustenhalter by 549.27%
[+] Created duplicate : Waterwheelpart1.000
[+] Staging objects : BOTH_LEFT
[+] Union between : Waterwheelpart1.000 & Dr Best Filamenbremse Zahnbustenhalter
[!] Number of faces #1 : 223981 + number of faces #2 : 2028 = 226009
[!] Number of faces of union: 219335
[+] Cleaning non manifold
[!] Total removed V: -3.00%, E: -2.89%, F: -2.82%
[-] Object is malformed
[-] Union did not work well. Discarding object.

[+] Getting object #14
[+] No STL in that folder

[+] Getting object #14
[<] Importing : downloads/8441/midcirclebit.stl
[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: 0.00%, F: 0.00%
[+] Preparing : Midcirclebit
[+] Rotating object = Midcirclebit
[!] Volume difference is 0.52%
[+] Scaled Midcirclebit by 267.76%
[+] Created duplicate : Waterwheelpart1.000
[+] Staging objects : ON_LEFT
[+] Union between : Waterwheelpart1.000 & Midcirclebit
[!] Number of faces #1 : 223981 + number of faces #2 : 1888 = 225869
[!] Number of faces of union: 225854
[+] Cleaning non manifold
[!] Total removed V: -0.00%, E: -0.00%, F: -0.00%

[+] Getting object #15
[<] Importing : downloads/730671/3DVM_PR_zooforo_51.stl
[+] Cleaning non manifold
[!] Total removed V: -0.01%, E: 0.56%, F: 0.86%
[+] Preparing : 3DVM PR zooforo 51
[+] Reducing the number of polygons by 57.88%
[+] Rotating object = 3DVM PR zooforo 51
[!] Volume difference is 73.81%
[+] Created duplicate : Waterwheelpart1.001
[+] Staging objects : ON_LEFT
[+] Union between : Waterwheelpart1.001 & 3DVM PR zooforo 51
[!] Number of faces #1 : 225852 + number of faces #2 : 100000 = 325852
[!] Number of faces of union: 325279
[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: -0.00%, F: -0.00%

[+] Getting object #16
[<] Importing : downloads/1437580/Protezione_profilato_alluminio_Fresa_rev001.stl
[+] Cleaning non manifold
[!] Total removed V: -0.15%, E: -0.15%, F: -0.15%
[+] Preparing : Protezione profilato alluminio Fresa rev001
[+] Rotating object = Protezione profilato alluminio Fresa rev001
[!] Volume difference is 0.01%
[+] Scaled Protezione profilato alluminio Fresa rev001 by 965.42%
[+] Created duplicate : Waterwheelpart1.000
[+] Staging objects : BOTH_BACK
[+] Union between : Waterwheelpart1.000 & Protezione profilato alluminio Fresa rev001
[!] Number of faces #1 : 325278 + number of faces #2 : 14572 = 339850
[!] Number of faces of union: 338006
[+] Cleaning non manifold
[!] Total removed V: -26.68%, E: -27.14%, F: -27.33%
[-] Object is malformed
[-] Union did not work well. Discarding object.

[>] Exporting STL to : /uploads/20170510-0248-29

More from Art

view more

All Apps

Auto-magically prepare your 3D models for 3D printing. A cloud based 3D models Preparing and Healing solution for 3D Printing, MakePrintable provides features for model repairing, wall thickness...

App Info Launch App

Kiri:Moto is an integrated cloud-based slicer and tool-path generator for 3D Printing, CAM / CNC and Laser cutting. *** 3D printing mode provides model slicing and GCode output using built-in...

App Info Launch App
KiriMoto Thing App

With 3D Slash, you can edit 3d models like a stonecutter. A unique interface: as fun as a building game! The perfect tool for non-designers and children to create in 3D.

App Info Launch App

SPAM!

Useless GARBAGE.

Top