This is a remix of my beecheeseframe based on stylesuxx´s awesome cheeseframe.
Print it with 100% infill. You can print it pretty fast with still good results.
It will fit 8520 motors and 55mm props. The ducts are reduced to save weight and resized to fit bigger propeller.The 55mm props improve flight performance and flight duration alot, compared to the 50mm version. I got around 6 Minutes on 700mah 1s. It anyhow doesnt feel that agile, but has more power to compensate hard moves.
I did some reinforcment at weak points. It can take some hits and is easy to fix using superglue if something went wrong ;)
Connectors you will need: (Links to banggood.com)
4x JST SH 1.0 - 2 Pin - pigtails or connectors for the motors ->https://goo.gl/72d5is
1x JST SH 1.0 - 4 Pin - pigtails or connectors for the fpv camera -> https://goo.gl/r3Vn92
More from 3D Printing
More from R/C Vehicles
Save to Dropbox
If you’re logged into Dropbox, you can save directly to Dropbox.
Show Some Love
Say thanks by giving Noctaro a tip and help them continue to share amazing Things with
the Thingiverse community.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.