Embedded Systems Rack Raspberry PI 2 and 3
by jasonkuehl, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a custom rack mount for the Raspberry PI 2 and 3
1. Rack mount to standard 1u 2. Front facing power 3. Heat set screws, easy for attaching devices 4. Room to added add-ons for GPIO headers. 5. Super easy to remove and work with. 6. Very little support needed when printing. 7. A place for nuts on the bottom if case you don't have access to heat set screws. 8. A section in the front to add a label of what the device is. 9. Places at attach Velcro and tie wraps for add-ons.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Embedded Systems Rack Raspberry PI 2 and 3 by jasonkuehl is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving jasonkuehl a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure jasonkuehl would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).