Contents
Tags
Remixed From
License
Liked By View All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.
Print Thing TagMakes
Summary
I updated the original design by rcexplorer for 12.7mm square (close to 1/2" square) wood boom/arms available in US. The notch to hold the arms in place does not work, so I removed it from my previous version. The large surface area seems to hold the arms in place due to friction.
The added comments will help you to modify the OpenScad file. Added APM 2.5 mount holes. I am planning to add counter sink holes for APM 2.5 mount points.
- Edit the OpenScad file to change the width of the wood boom/arm you plan to use. Export STL file.
- Print 2 of this part. Use them for top and bottom.
- Follow the build instructions to make your own tri-copter.
Sample instructions link: http://rcexplorer.se/projects/2011/09/the-tricopter-v2-5/
Instructions
NOTE: This is a work in progress.
I updated the original design by rcexplorer for 12.7mm square (close to 1/2" square) wood boom/arms available in US. The notch has been removed from the design as it does not seem to work. The extra surface area seems sufficient to hold the arms in place.
The added comments will help you to modify the OpenScad file. Added APM 2.5 mount holes.
- Edit the OpenScad file to change the width of the wood boom/arm you plan to use. Export STL file.
- Print 2 of this part. Use them for top and bottom.
- Follow the build instructions to make your own tri-copter.
Sample instructions link: http://rcexplorer.se/projects/2011/09/the-tricopter-v2-5/
More from R/C Vehicles
