Penny Fidget Spinner
by walter, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Fidget spinner using US pennies as weights, in several different sizes. There are very small ridges that hold the bearings and pennies in place, designed to fit the chamfer on Bones Reds bearings* (they have a smaller chamfer than the VXB bearings* I also have). The pennies and bearing should stay in place without glue and can be removed.
Older pennies (made before 1982) are made with copper and should be almost 25% heavier. If you want to modify the tolerances, you can do so in Onshape.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Penny Fidget Spinner by walter is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving walter a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure walter would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).