This is a simple tool for cutting teflontubes to a required length.
It has an ajustable endstop to make cutting easier.
The cut of the tube is rectangular, so there are no problems tightness and filament overflow at the heatblock of the hotend.
To assemple this tool you´ll need the following things:
1x cutter knife blade
1x M5 x 25mm screw
1x M5 nut
2x M3 x 12mm countersunk screw
2x m3 nut
Be careful with the knife.
I twisted some duct tabe on the overstanding knife blade to avoid cutting myself.