by TigerAce1945, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
“During the European Campaign, the Division had some 648 Sherman tanks completely destroyed in combat and had another 700 knocked out, repaired and put back into operation. This was a loss rate of 580 percent.” -Belton Cooper, Death Traps
This is a collection of 1:100 Sherman tank models.
!!!special thanks to everyone who provided feedback while these were in the test print factory in particular Buchnerb (http://www.thingiverse.com/Buchnerb/about) and ThatEmuGuy (http://www.thingiverse.com/ThatEmuGuy/about) both helped out a great deal!!!
M4 Sherman I
M4a1 Sherman II
M4a1e6 (includes special oddball version)
M4a2 Sherman III
M4a3 (Includes up-armored marine and 76mm versions)
M4a3e2 (75 and 76mm)
M4a3e8 (Includes up-armored Thunderbolt VII)
Firefly Sherman VC Sherman IC
Sherman calliope (warning this model is very difficult to print, only for advanced printers)
Sherman wizbang (warning this model is very difficult to print, only for advanced printers)
T1E3 mine roller
sherman crocodile ( uses Bergman's Fuel trailer from 1:200 pack 3 http://www.thingiverse.com/thing:539511)
misc (includes hedge cutters and turret mgs, these are a difficult to print)
All hulls and turrets made from scratch
I believe this is the largest amount of models I have ever done in a single release
Please join my group http://www.thingiverse.com/groups/the-world-at-war/topics
please view my other packs
Panzer III Pack (http://www.thingiverse.com/thing:1821937)
Soviet Multi-turret Pack (http://www.thingiverse.com/thing:1807534)
T-34/76 pack (http://www.thingiverse.com/thing:1810119)
Stug III Pack (http://www.thingiverse.com/thing:1817251)
Heavy Flak Pack (http://www.thingiverse.com/thing:1972117)
KV tank pack (http://www.thingiverse.com/thing:2011570)
Japanese Prototype Pack (http://www.thingiverse.com/thing:1993230)
Print hulls and turrets horizontally. Tracks should be flat with the face that contacts the hull down.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Sherman Pack by TigerAce1945 is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving TigerAce1945 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure TigerAce1945 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).