These files provide a Micro Quad Frame, Camera & Battery mount solution for the Blade Inductrix (the original micro kwad), Ragg-E Micro FPV, and LynxHeli spider 65 frames. The camera mount is currently tilted at 25-degrees.
I have also added a remix on Camel Kucuk & Tom Ashley Ragg-E micro motor cap too.
And as always I would really appreciate your thoughts, comments and feedback...
If you are using www.rigid.ink then following settings apply
Print at: 190 to 210 degrees celsius
Heated bed: 40 to 60 degrees celsius
Notes: Adheres well to Buildtak bed https://www.buildtak.eu
Once the parts are printed drill out all of the screw holes using a 1mm drill, and the motor holes with 6mm drill. It is always a good idea to trim or clean the rough edges off any model, especially a 3D printed one...
How I Designed This
Designed with Fusion 360, printed using Simplify3D
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.