Nintendo Switch rotating and detachable wall mount (No scratching)
by RarePepeMeme, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Video of assembly and use: https://youtu.be/RFCN4XdV-yo
I made this Nintendo Switch wall mount, as i like to play the switch in my bed, but its not very comfy to hold the switch while laying in the bed, and i like to lay sideways and play. So i made this wall mount that can turn into any angle you like, so you can play while laying on your side, it can of course also be used as a normal wall mount.
The wall mount is detachable and uses a module system, this means that you could make a normal stand that had the module connector and this system would work too, im planning to do this in the future, so its a multi tool. If you wanted you could also use this system for making a mount for the car.
There's a hole in the bottom so the switch can charge while playing. I made the holder specifically for not scratching the switch, as that has been a problem for some. The case only touches the metal rails and the two holes in the bottom
REMEMBER TO PRINT IN RIGHT ORIENTATION, especially the holder that slides on the switch, the indents should be facing upward
If they don't connect correctly, try cutting the edges of the holders module connector.
If people like it i will make a stand that uses this system aswell so you can seamlessly switch between using a stand and a wall mount
Printed in green PLA
2 mm height
50 mm/s speed
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Nintendo Switch rotating and detachable wall mount (No scratching) by RarePepeMeme is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving RarePepeMeme a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure RarePepeMeme would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).