Line Follower Assembly
by CaptCupcake, published
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This assembly creates the frame for a DIY line follower robot meant to house 2 sensors consisting of a photocell and led in each sensor. There are spots for two continuous servos to drive the robot. The frame was a designed to hold the acrylic experimenter's plate from the Adafruit ARDX V1.3 kit. The design also has zip tie holes to hold a 6v battery pack under the frame to power the servos. This design is completely open source and open for any and all to modify or use. Enjoy.
FLSUN Kossel Mini
The frame was able to fit on a 180mm diameter print bed so long as no brims were used.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Line Follower Assembly by CaptCupcake is licensed under the Creative Commons - Public Domain Dedication license.
What does this mean?
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving CaptCupcake a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure CaptCupcake would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).