Extruded lid for CNC 1590A+, to fit a LiPo or just some extra clearance for 2S 18650 configurations. If you want this to fit a Hammond 1590A, then scale in slicer settings- 93.0mm X 38.5mm
This lid will provide an 8.50mm extruded clearance for battery pack/18650's. Works great on Hammond 1590A boxes using these MosMax Electronics battery sleds.. Owner of MosMax, David, says they won't work in hammond 1590A boxes, and normally they won't, but I get them to work using these lids.
Or you can 3D print a battery sled for 1590A boxes.
I personally use 1/2" grub screws on the enclosure and leave them protruding out about 1/4" and I don't even need magnets to keep these lids firmly attached. The grub screws will catch just right and hold the lid firmly in place. Magnets will always make a stronger hold though.
More box mod parts here- http://www.thingiverse.com/Madyn3D-CNC_LLC/designs/page:1
Please email [email protected] for custom lids and designs. Any sized enclosures, any design possible.
Vinyl adhesion is mounted on the insides of the lids shown in the photos to produce color effects. The design will be cut out on the lid. You can experiment with different backings to produce interesting effects and even add LED's behind the lid.
Please consider a small $5.00 PayPal donation linked on my home page, if you are interested in a solid lid with no design. You will receive a dropbox link to the .stl file.