Mini Flying Saucer UFO Fidget Spinner Hand Spinner
by dellrio, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a small version of my UFO Fidget Spinner. Uses either 4 or 8 M8 nuts for weighting, and uses 1 - 608 Ball Bearing. No glue required this all fits together with just pressure.
You may need to clean up the Bearing hole for proper fitment, the Bearing with the top and bottom cap should sit approximately half way between the two halves.
I printed all 4 components on one tray with the Center Cap centered in the middle of the top/bottom pieces You need supports for the caps
Update - the model posted yesterday did not have the clearance for the M8 Nuts - I have updated the Top and Bottom to accomodate M8 Nuts.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Mini Flying Saucer UFO Fidget Spinner Hand Spinner by dellrio is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving dellrio a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure dellrio would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).