Parametric spinner in Fusion360
by jsc, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Parametric spinner in Fusion360 based on 2ROBOTGUY's drawings. Autodesk link to latest version: http://a360.co/2q1n1o5.
Go to Modify->Change Parameters to change relevant dimensions. As presented, sized to hold four quarters as weights (24.26 mm), as that gives the heaviest weight using US coins. Using a weight_od of 22 gives the usual four bearing spinner. See here for other coin sizes. With a 608 bearing, you can only hold as many coins as will stack into 7mm. 4 quarters turns out to be exactly 7mm.
Because of the edge fillets, best results are obtained by printing as two halves, then carefully aligning and gluing them. Most slicers can split a model by dropping the model down through the bed by half the width (3.5mm).
Also contains drawings for my threaded caps.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Parametric spinner in Fusion360 by jsc is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving jsc a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure jsc would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).