Loading

Customizable Adaptor Statues Statue

by shivinteger, published

Customizable Adaptor Statues Statue by shivinteger May 20, 2017
0 Share
Download All Files

Thing Apps Enabled

Order This Printed View All Apps

Summary

FAQ: http://www.thingiverse.com/shivinteger/about

[>>>] Generating Attributions log:

[0] Thing Title : Labyrinth
[0] Thing URL : http://www.thingiverse.com/thing:34766
[0] Thing Author : MakerBot
[0] Thing Licence : Creative Commons - Attribution

[1] Thing Title : Adjustable Extruder Latch
[1] Thing URL : http://www.thingiverse.com/thing:122030
[1] Thing Author : arnold
[1] Thing Licence : Creative Commons - Attribution

[2] Thing Title : SD Card Case
[2] Thing URL : http://www.thingiverse.com/thing:213842
[2] Thing Author : MakerBot
[2] Thing Licence : Creative Commons - Attribution

[3] Thing Title : Christ Jesus on the cross
[3] Thing URL : http://www.thingiverse.com/thing:220252
[3] Thing Author : offcentercreations
[3] Thing Licence : Creative Commons - Attribution

[4] Thing Title : Customizable Cuvette Adaptor
[4] Thing URL : http://www.thingiverse.com/thing:237237
[4] Thing Author : Emanresu
[4] Thing Licence : Creative Commons - Attribution

[5] Thing Title : basic seaman
[5] Thing URL : http://www.thingiverse.com/thing:323778
[5] Thing Author : buzzard
[5] Thing Licence : Creative Commons - Attribution

[6] Thing Title : the Year of the Monkey Little Statues
[6] Thing URL : http://www.thingiverse.com/thing:1326728
[6] Thing Author : Ratherwok
[6] Thing Licence : Creative Commons - Attribution

[7] Thing Title : Submarine Powered By Rubber Bands
[7] Thing URL : http://www.thingiverse.com/thing:1352223
[7] Thing Author : SidneyKi
[7] Thing Licence : Creative Commons - Attribution

[8] Thing Title : Z Nation - Doc vs Zombie Statue
[8] Thing URL : http://www.thingiverse.com/thing:1837434
[8] Thing Author : Syfy
[8] Thing Licence : Creative Commons - Attribution

[9] Thing Title : Slik tripod drive shaft
[9] Thing URL : http://www.thingiverse.com/thing:2187492
[9] Thing Author : Miki4
[9] Thing Licence : Creative Commons - Attribution

[+] Attributions logged

[+] Getting object #0
[<] Importing : downloads/237237/cuvette_adaptor_3.7mm_1mmPL.stl
[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: 0.00%, F: 0.00%
[+] Preparing : cuvette adaptor 3.7mm 1mmPL

[+] Getting object #1
[<] Importing : downloads/1837434/Znation_Doc_upright.stl
[+] Cleaning non manifold
[!] Total removed V: -0.01%, E: -0.02%, F: -0.02%
[+] Preparing : Znation Doc upright
[+] Reducing the number of polygons by 55.23%
[+] Rotating object = Znation Doc upright
[!] Volume difference is 38698.51%
[+] Scaled Znation Doc upright by 29.56%
[+] Created duplicate : cuvette adaptor 3.7mm 1mmPL.001
[+] Staging objects : ON_BACK
[+] Union between : cuvette adaptor 3.7mm 1mmPL.001 & Znation Doc upright
[!] Number of faces #1 : 228 + number of faces #2 : 99999 = 100227
[!] Number of faces of union: 99437
[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: 0.00%, F: 0.00%

[+] Getting object #2
[<] Importing : downloads/1091248/Hurricane_Patricia.stl
[+] Cleaning non manifold
[!] Total removed V: -0.78%, E: -0.02%, F: 0.38%
[+] Preparing : Hurricane Patricia
[+] Rotating object = Hurricane Patricia
[!] Volume difference is 434.41%
[+] Created duplicate : cuvette adaptor 3.7mm 1mmPL.000
[+] Staging objects : ON_LEFT
[+] Union between : cuvette adaptor 3.7mm 1mmPL.000 & Hurricane Patricia
[!] Number of faces #1 : 99437 + number of faces #2 : 59024 = 158461
[!] Number of faces of union: 157848
[+] Cleaning non manifold
[!] Total removed V: -6.50%, E: -6.15%, F: -5.95%
[-] Object is malformed
[-] Union did not work well. Discarding object.

[+] Getting object #3
[<] Importing : downloads/323778/My_Scan_3.stl
[+] Cleaning non manifold
[!] Total removed V: -0.03%, E: -0.03%, F: -0.03%
[+] Preparing : My Scan 3
[+] Rotating object = My Scan 3
[!] Volume difference is 35.79%
[+] Created duplicate : cuvette adaptor 3.7mm 1mmPL.000
[+] Staging objects : ON_BOTTOM
[+] Union between : cuvette adaptor 3.7mm 1mmPL.000 & My Scan 3
[!] Number of faces #1 : 99437 + number of faces #2 : 12606 = 112043
[!] Number of faces of union: 111331
[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: 0.00%, F: 0.00%

[+] Getting object #4
[<] Importing : downloads/122030/latch_lock.stl
[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: -0.31%, F: -0.47%
[+] Preparing : Latch Lock
[+] Rotating object = Latch Lock
[!] Volume difference is 0.85%
[+] Scaled Latch Lock by 227.30%
[+] Created duplicate : cuvette adaptor 3.7mm 1mmPL.001
[+] Staging objects : ON_LEFT
[+] Union between : cuvette adaptor 3.7mm 1mmPL.001 & Latch Lock
[!] Number of faces #1 : 111331 + number of faces #2 : 426 = 111757
[!] Number of faces of union: 109468
[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: 0.00%, F: 0.00%

[+] Getting object #5
[<] Importing : downloads/1326728/monkey_king.STL
[+] Cleaning non manifold
[!] Total removed V: -0.04%, E: -0.05%, F: -0.06%
[+] Preparing : monkey king
[+] Rotating object = monkey king
[!] Volume difference is 20.30%
[+] Created duplicate : cuvette adaptor 3.7mm 1mmPL.000
[+] Staging objects : BOTH_LEFT
[+] Union between : cuvette adaptor 3.7mm 1mmPL.000 & monkey king
[!] Number of faces #1 : 109468 + number of faces #2 : 59042 = 168510
[!] Number of faces of union: 156426
[+] Cleaning non manifold
[!] Total removed V: -0.01%, E: -0.01%, F: -0.01%

[+] Getting object #6
[<] Importing : downloads/34766/LABYRINTH_x_1.stl
[+] Cleaning non manifold
[!] Total removed V: -0.27%, E: -0.28%, F: -0.28%
[+] Preparing : LABYRINTH x 1
[+] Reducing the number of polygons by 92.55%
[+] Rotating object = LABYRINTH x 1
[!] Volume difference is 224.64%
[+] Created duplicate : cuvette adaptor 3.7mm 1mmPL.001
[+] Staging objects : DEFAULT
[+] Union between : cuvette adaptor 3.7mm 1mmPL.001 & LABYRINTH x 1
[!] Number of faces #1 : 156418 + number of faces #2 : 100006 = 256424
[!] Number of faces of union: 219584
[+] Cleaning non manifold
[!] Total removed V: -0.01%, E: -0.00%, F: -0.00%

[+] Getting object #7
[<] Importing : downloads/213842/SD_Snowflake_Holder.stl
[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: -0.00%, F: -0.00%
[+] Preparing : SD Snowflake Holder
[+] Reducing the number of polygons by 28.52%
[+] Rotating object = SD Snowflake Holder
[!] Volume difference is 43.49%
[+] Created duplicate : cuvette adaptor 3.7mm 1mmPL.000
[+] Staging objects : BOTH_RIGHT
[+] Union between : cuvette adaptor 3.7mm 1mmPL.000 & SD Snowflake Holder
[!] Number of faces #1 : 219578 + number of faces #2 : 100000 = 319578
[!] Number of faces of union: 313966
[+] Cleaning non manifold
[!] Total removed V: -0.00%, E: -0.00%, F: -0.00%

[+] Getting object #8
[<] Importing : downloads/220252/Christ_Jesus_on_the_cross.stl
[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: -0.09%, F: -0.13%
[+] Preparing : Christ Jesus on the cross
[+] Rotating object = Christ Jesus on the cross
[!] Volume difference is 11.58%
[+] Created duplicate : cuvette adaptor 3.7mm 1mmPL.001
[+] Staging objects : ON_FRONT
[+] Union between : cuvette adaptor 3.7mm 1mmPL.001 & Christ Jesus on the cross
[!] Number of faces #1 : 313964 + number of faces #2 : 10955 = 324919
[!] Number of faces of union: 324919
[+] Cleaning non manifold
[!] Total removed V: -0.00%, E: -0.00%, F: -0.00%

[+] Getting object #9
[<] Importing : downloads/1217701/50x50mm_cooling_V2-_5mm_lower.stl
[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: 0.00%, F: 0.00%
[+] Preparing : 50x50mm cooling V2- 5mm lower
[+] Rotating object = 50x50mm cooling V2- 5mm lower
[!] Volume difference is 33.45%
[+] Created duplicate : cuvette adaptor 3.7mm 1mmPL.000
[+] Staging objects : DEFAULT
[+] Union between : cuvette adaptor 3.7mm 1mmPL.000 & 50x50mm cooling V2- 5mm lower
[!] Number of faces #1 : 324917 + number of faces #2 : 6146 = 331063
[!] Number of faces of union: 325498
[+] Cleaning non manifold
[!] Total removed V: -75.29%, E: -74.01%, F: -73.19%
[-] Object is malformed
[-] Union did not work well. Discarding object.

[+] Getting object #10
[<] Importing : downloads/1352223/SubmarineBearings.stl
[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: 0.00%, F: 0.00%
[+] Preparing : SubmarineBearings
[+] Rotating object = SubmarineBearings
[!] Volume difference is 0.01%
[+] Scaled SubmarineBearings by 898.76%
[+] Created duplicate : cuvette adaptor 3.7mm 1mmPL.000
[+] Staging objects : BOTH_RIGHT
[+] Union between : cuvette adaptor 3.7mm 1mmPL.000 & SubmarineBearings
[!] Number of faces #1 : 324917 + number of faces #2 : 320 = 325237
[!] Number of faces of union: 264306
[+] Cleaning non manifold
[!] Total removed V: -0.00%, E: -0.00%, F: -0.00%

[+] Getting object #11
[<] Importing : downloads/2187492/slick_rod2s.stl
[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: 0.00%, F: 0.00%
[+] Preparing : Slick Rod2S
[+] Rotating object = Slick Rod2S
[!] Volume difference is 1.23%
[+] Scaled Slick Rod2S by 201.28%
[+] Created duplicate : cuvette adaptor 3.7mm 1mmPL.001
[+] Staging objects : DEFAULT
[+] Union between : cuvette adaptor 3.7mm 1mmPL.001 & Slick Rod2S
[!] Number of faces #1 : 264301 + number of faces #2 : 3296 = 267597
[!] Number of faces of union: 241894
[+] Cleaning non manifold
[!] Total removed V: -0.00%, E: -0.00%, F: -0.00%

[>] Exporting STL to : /uploads/20170518-1953-38

More from Art

view more

All Apps

Auto-magically prepare your 3D models for 3D printing. A cloud based 3D models Preparing and Healing solution for 3D Printing, MakePrintable provides features for model repairing, wall thickness...

App Info Launch App

Kiri:Moto is an integrated cloud-based slicer and tool-path generator for 3D Printing, CAM / CNC and Laser cutting. *** 3D printing mode provides model slicing and GCode output using built-in...

App Info Launch App
KiriMoto Thing App

With 3D Slash, you can edit 3d models like a stonecutter. A unique interface: as fun as a building game! The perfect tool for non-designers and children to create in 3D.

App Info Launch App

Print through a distributed network of 3D printing enthusiasts from across the US, at a fraction of the cost of the competitors. We want to change the world for the better through technology, an...

App Info Launch App

Treatstock is an online platform that offers decentralized manufacturing services such as 3D printing and CNC machining for clients all over the world. We offer free and instant access to comparati...

App Info Launch App

3D print your favourite design with NinjaPrototype, a professional 3D manufacture with consistent quality and speed.

App Info Launch App
Top