I wanted a way to mount my Drive Pro plow controller. I also had problems with the plow lights accidentally being turned on or off when moving the controller around. This is what I came up with and it worked great for me last winter. I have also created a mount that slides over the emergency brake which is included in the blend file but I did not include g files for that since it is not complete. I have an extender that lifts the controller up off the e-brake, but I am still working on dimensions. The extender I made was not quite high enough. Sorry, but the plow controller wrapper requires drilling for screws to mount the two pieces together, but can easily be drilled to accept 4 or 6 small screws. That is what I did using a drill press, but hand drill should work.
The cover is not subdivided or rounded, it is basically squared off. Since the light switch is now recessed, I have yet to accidentally turn them off yet after a season of plowing.
I have included the dimensions in the images uploaded. They are also in the blend file.
I used standard print settings in low quality.
As mentioned earlier, I did not use subdivision or rounding of edges. It may be also possible to reduce the size of the box walls, but they do make it feel quite rugged. Currently in my Jeep, it rides underneath the emergency brake until I need to use it. It will also site higher up in front of the emergency brake but my original intention was to make it easily slide on and off of the emergency brake handle. As also mentioned, I did not pre-drill any holes for screws. I drilled a pilot hole in each corner and that appears to suffice.