Duplicator 6 feet
by jahknee, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Feet for Duplicator 6 / Maker Ultimate 3d
There are feet for these printers out there, but I wanted something that printed quicker. These are 30x30mm wide and 10mm high (up to the slot).
I printed these with TPU 90A at ~40% infill. One piece takes about 90min when printed at 0.2mm and 20mm/sec.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Duplicator 6 feet by jahknee is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving jahknee a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure jahknee would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).