Loading

Platonic Flat Filter Mold

by shivinteger, published

Platonic Flat Filter Mold by shivinteger May 27, 2017
0 Share
Download All Files

Thing Apps Enabled

Order This Printed View All Apps

Summary

FAQ: http://www.thingiverse.com/shivinteger/about

[>>>] Generating Attributions log:

[0] Thing Title : Refillable Pet Fountain Water Filter
[0] Thing URL : http://www.thingiverse.com/thing:9001
[0] Thing Author : leghk
[0] Thing Licence : Creative Commons - Attribution - Share Alike

[1] Thing Title : Parametric Threaded Ogive Rocket Nose Cone
[1] Thing URL : http://www.thingiverse.com/thing:26506
[1] Thing Author : bld
[1] Thing Licence : Creative Commons - Attribution - Share Alike

[2] Thing Title : PEN-CARD-CLIP HOLDER FOR OFFICE DESK
[2] Thing URL : http://www.thingiverse.com/thing:138297
[2] Thing Author : PARTMAKER
[2] Thing Licence : Creative Commons - Attribution - Share Alike

[3] Thing Title : Platonic Solids with Numbers
[3] Thing URL : http://www.thingiverse.com/thing:546711
[3] Thing Author : dmarquee
[3] Thing Licence : Creative Commons - Attribution - Share Alike

[4] Thing Title : Itty Bitty Double Extruder (with mount for MakerFarm Prusa i3v)
[4] Thing URL : http://www.thingiverse.com/thing:566329
[4] Thing Author : clough42
[4] Thing Licence : Creative Commons - Attribution - Share Alike

[5] Thing Title : Trail Finder 2 mojave roll cage
[5] Thing URL : http://www.thingiverse.com/thing:703506
[5] Thing Author : lcalcena
[5] Thing Licence : Creative Commons - Attribution - Share Alike

[6] Thing Title : Spider Rover for 150mm x 150mm bed
[6] Thing URL : http://www.thingiverse.com/thing:785823
[6] Thing Author : Nathan720
[6] Thing Licence : Creative Commons - Attribution - Share Alike

[7] Thing Title : Make: Robot Hotglue Injection Mold
[7] Thing URL : http://www.thingiverse.com/thing:796654
[7] Thing Author : JackJ106
[7] Thing Licence : Creative Commons - Attribution - Share Alike

[8] Thing Title : Coin Cargo Ship
[8] Thing URL : http://www.thingiverse.com/thing:888674
[8] Thing Author : Crump27
[8] Thing Licence : Creative Commons - Attribution - Share Alike

[9] Thing Title : Quarter Sub - AKA Cartesian Diver
[9] Thing URL : http://www.thingiverse.com/thing:909899
[9] Thing Author : Rapslogan
[9] Thing Licence : Creative Commons - Attribution - Share Alike

[10] Thing Title : Nerf Tactical Rail Flat Adapter
[10] Thing URL : http://www.thingiverse.com/thing:992267
[10] Thing Author : MaraMagus
[10] Thing Licence : Creative Commons - Attribution - Share Alike

[11] Thing Title : Introduction to Parametric Customization
[11] Thing URL : http://www.thingiverse.com/thing:1201466
[11] Thing Author : txoof
[11] Thing Licence : Creative Commons - Attribution - Share Alike

[12] Thing Title : Oscillation Overthruster
[12] Thing URL : http://www.thingiverse.com/thing:1205814
[12] Thing Author : SFoskett
[12] Thing Licence : Creative Commons - Attribution - Share Alike

[+] Attributions logged

[+] Getting object #0
[+] No STL in that folder

[+] Getting object #0
[<] Importing : downloads/15680/DHMN-keychain.stl
[+] Cleaning non manifold
[!] Total removed V: -1.60%, E: -1.70%, F: -1.78%
[-] Object is malformed
[+] Deleting bad source : downloads/15680/DHMN-keychain.stl

[+] Getting object #0
[<] Importing : downloads/888674/coin_cargo_ship.stl
[+] Cleaning non manifold
[!] Total removed V: -0.45%, E: -0.48%, F: -0.48%
[+] Preparing : Coin Cargo Ship

[+] Getting object #1
[<] Importing : downloads/26506/ogive-threaded-base.stl
[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: -0.07%, F: -0.11%
[+] Preparing : Ogive-Threaded-Base
[+] Rotating object = Ogive-Threaded-Base
[!] Volume difference is 7276.25%
[+] Scaled Ogive-Threaded-Base by 51.61%
[+] Created duplicate : Coin Cargo Ship.001
[+] Staging objects : ON_RIGHT
[+] Union between : Coin Cargo Ship.001 & Ogive-Threaded-Base
[!] Number of faces #1 : 236 + number of faces #2 : 1830 = 2066
[!] Number of faces of union: 2007
[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: 0.00%, F: 0.00%

[+] Getting object #2
[<] Importing : downloads/9001/PetFountainFilter.stl
[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: -0.37%, F: -0.55%
[+] Preparing : PetFountainFilter
[+] Rotating object = PetFountainFilter
[!] Volume difference is 99.49%
[+] Created duplicate : Coin Cargo Ship.000
[+] Staging objects : ON_TOP
[+] Union between : Coin Cargo Ship.000 & PetFountainFilter
[!] Number of faces #1 : 2156 + number of faces #2 : 684 = 2840
[!] Number of faces of union: 2891
[+] Cleaning non manifold
[!] Total removed V: -0.06%, E: -0.04%, F: -0.03%

[+] Getting object #3
[<] Importing : downloads/1205814/printable_oscillation_overthruster_top.stl
[+] Cleaning non manifold
[!] Total removed V: -0.18%, E: -0.21%, F: -0.22%
[+] Preparing : Printable Oscillation Overthruster Top
[+] Rotating object = Printable Oscillation Overthruster Top
[!] Volume difference is 505.54%
[+] Created duplicate : Coin Cargo Ship.001
[+] Staging objects : BOTH_RIGHT
[+] Union between : Coin Cargo Ship.001 & Printable Oscillation Overthruster Top
[!] Number of faces #1 : 2890 + number of faces #2 : 71134 = 74024
[!] Number of faces of union: 72036
[+] Cleaning non manifold
[!] Total removed V: -0.06%, E: -0.03%, F: -0.02%

[+] Getting object #4
[<] Importing : downloads/796654/moldtop.stl
[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: 0.00%, F: 0.00%
[+] Preparing : Moldtop
[+] Rotating object = Moldtop
[!] Volume difference is 19.08%
[+] Created duplicate : Coin Cargo Ship.000
[+] Staging objects : BOTH_RIGHT
[+] Union between : Coin Cargo Ship.000 & Moldtop
[!] Number of faces #1 : 72022 + number of faces #2 : 7584 = 79606
[!] Number of faces of union: 77702
[+] Cleaning non manifold
[!] Total removed V: -0.01%, E: -0.01%, F: -0.00%

[+] Getting object #5
[<] Importing : downloads/703506/jaula_hilux.STL
[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: 0.00%, F: 0.00%
[+] Preparing : jaula hilux
[+] Rotating object = jaula hilux.001
[!] Volume difference is 469.44%
[+] Created duplicate : Coin Cargo Ship.001
[+] Staging objects : ON_FRONT
[+] Union between : Coin Cargo Ship.001 & jaula hilux.001
[!] Number of faces #1 : 77700 + number of faces #2 : 2060 = 79760
[!] Number of faces of union: 79745
[+] Cleaning non manifold
[!] Total removed V: -0.00%, E: -0.00%, F: -0.00%

[+] Getting object #6
[+] No STL in that folder

[+] Getting object #6
[<] Importing : downloads/12097/d20.stl
[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: -0.17%, F: -0.26%
[+] Preparing : D20
[+] Rotating object = D20
[!] Volume difference is 9.98%
[+] Scaled D20 by 100.08%
[+] Created duplicate : Coin Cargo Ship.000
[+] Staging objects : DEFAULT
[+] Union between : Coin Cargo Ship.000 & D20
[!] Number of faces #1 : 79744 + number of faces #2 : 2713 = 82457
[!] Number of faces of union: 14992
[+] Cleaning non manifold
[!] Total removed V: -0.92%, E: -0.57%, F: -0.33%
[-] Union did not work well. Discarding object.

[+] Getting object #7
[<] Importing : downloads/566329/ServoShelfBracket-HXT900.STL
[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: 0.00%, F: 0.00%
[+] Preparing : ServoShelfBracket-HXT900
[+] Rotating object = ServoShelfBracket-HXT900
[!] Volume difference is 0.93%
[+] Scaled ServoShelfBracket-HXT900 by 220.67%
[+] Created duplicate : Coin Cargo Ship.000
[+] Staging objects : BOTH_TOP
[+] Union between : Coin Cargo Ship.000 & ServoShelfBracket-HXT900
[!] Number of faces #1 : 79744 + number of faces #2 : 9668 = 89412
[!] Number of faces of union: 89089
[+] Cleaning non manifold
[!] Total removed V: -0.00%, E: -0.00%, F: 0.00%

[+] Getting object #8
[<] Importing : downloads/1201466/sliding_top_box.stl
[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: -0.09%, F: -0.13%
[+] Preparing : Sliding Top Box
[+] Rotating object = Sliding Top Box.001
[!] Volume difference is 2.39%
[+] Scaled Sliding Top Box.001 by 161.10%
[+] Created duplicate : Coin Cargo Ship.001
[+] Staging objects : BOTH_FRONT
[+] Union between : Coin Cargo Ship.001 & Sliding Top Box.001
[!] Number of faces #1 : 89089 + number of faces #2 : 380 = 89469
[!] Number of faces of union: 89347
[+] Cleaning non manifold
[!] Total removed V: -0.01%, E: -0.01%, F: -0.00%

[+] Getting object #9
[<] Importing : downloads/618378/volt_meter_housing_028.stl
[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: 0.00%, F: 0.00%
[+] Preparing : Volt Meter Housing 028
[+] Rotating object = Volt Meter Housing 028
[!] Volume difference is 0.22%
[+] Scaled Volt Meter Housing 028 by 359.48%
[+] Created duplicate : Coin Cargo Ship.000
[+] Staging objects : ON_TOP
[+] Union between : Coin Cargo Ship.000 & Volt Meter Housing 028
[!] Number of faces #1 : 89343 + number of faces #2 : 112 = 89455
[!] Number of faces of union: 261
[+] Cleaning non manifold
[!] Total removed V: -68.29%, E: -65.77%, F: -56.32%
[-] Object is malformed
[-] Union did not work well. Discarding object.

[+] Getting object #10
[<] Importing : downloads/52952/Round_Hollow.stl
[+] Cleaning non manifold
[!] Total removed V: -0.48%, E: -1.08%, F: -1.39%
[-] Object is malformed
[+] Deleting bad source : downloads/52952/Round_Hollow.stl

[+] Getting object #10
[<] Importing : downloads/500550/x-end_zippy_SemiU_zadj.stl
[+] Cleaning non manifold
[!] Total removed V: -0.39%, E: -1.08%, F: -1.43%
[-] Object is malformed
[+] Deleting bad source : downloads/500550/x-end_zippy_SemiU_zadj.stl

[+] Getting object #10
[<] Importing : downloads/909899/Base.STL
[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: 0.00%, F: 0.00%
[+] Preparing : Base
[+] Rotating object = Base
[!] Volume difference is 0.87%
[+] Scaled Base by 225.59%
[+] Created duplicate : Coin Cargo Ship.000
[+] Staging objects : BOTH_RIGHT
[+] Union between : Coin Cargo Ship.000 & Base
[!] Number of faces #1 : 89343 + number of faces #2 : 756 = 90099
[!] Number of faces of union: 90147
[+] Cleaning non manifold
[!] Total removed V: -0.00%, E: -0.00%, F: 0.00%

[+] Getting object #11
[<] Importing : downloads/785823/leg_pin_middle_x6.stl
[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: -0.45%, F: -0.68%
[+] Preparing : Leg Pin Middle X6
[+] Rotating object = Leg Pin Middle X6
[!] Volume difference is 0.05%
[+] Scaled Leg Pin Middle X6 by 567.50%
[+] Created duplicate : Coin Cargo Ship.001
[+] Staging objects : DEFAULT
[+] Union between : Coin Cargo Ship.001 & Leg Pin Middle X6
[!] Number of faces #1 : 90147 + number of faces #2 : 2626 = 92773
[!] Number of faces of union: 90592
[+] Cleaning non manifold
[!] Total removed V: -0.00%, E: -0.00%, F: -0.00%

[+] Getting object #12
[<] Importing : downloads/992267/Tactical_Rail_Flat_Adapter.stl
[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: 0.00%, F: 0.00%
[+] Preparing : Tactical Rail Flat Adapter
[+] Rotating object = Tactical Rail Flat Adapter
[!] Volume difference is 0.22%
[+] Scaled Tactical Rail Flat Adapter by 359.61%
[+] Created duplicate : Coin Cargo Ship.000
[+] Staging objects : ON_BACK
[+] Union between : Coin Cargo Ship.000 & Tactical Rail Flat Adapter
[!] Number of faces #1 : 90591 + number of faces #2 : 60 = 90651
[!] Number of faces of union: 90637
[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: 0.00%, F: 0.00%

[+] Getting object #13
[<] Importing : downloads/138297/PENCARDHOLDER.stl
[+] Cleaning non manifold
[!] Total removed V: -0.38%, E: -0.70%, F: -0.75%
[+] Preparing : PENCARDHOLDER
[+] Rotating object = PENCARDHOLDER
[!] Volume difference is 15.18%
[+] Created duplicate : Coin Cargo Ship.001
[+] Staging objects : BOTH_BACK
[+] Union between : Coin Cargo Ship.001 & PENCARDHOLDER
[!] Number of faces #1 : 90637 + number of faces #2 : 4130 = 94767
[!] Number of faces of union: 92347
[+] Cleaning non manifold
[!] Total removed V: -0.01%, E: -0.01%, F: -0.00%

[+] Getting object #14
[<] Importing : downloads/361335/screws_v1.stl
[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: 0.00%, F: 0.00%
[+] Preparing : Screws V1
[+] Rotating object = Screws V1
[!] Volume difference is 0.02%
[+] Scaled Screws V1 by 858.23%
[+] Created duplicate : Coin Cargo Ship.000
[+] Staging objects : BOTH_FRONT
[+] Union between : Coin Cargo Ship.000 & Screws V1
[!] Number of faces #1 : 92346 + number of faces #2 : 1912 = 94258
[!] Number of faces of union: 92219
[+] Cleaning non manifold
[!] Total removed V: -14.08%, E: -11.14%, F: -9.45%
[-] Object is malformed
[-] Union did not work well. Discarding object.

[+] Getting object #15
[<] Importing : downloads/546711/dodecaeder.stl
[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: 0.00%, F: 0.00%
[+] Preparing : Dodecaeder
[+] Rotating object = Dodecaeder
[!] Volume difference is 0.74%
[+] Scaled Dodecaeder by 237.66%
[+] Created duplicate : Coin Cargo Ship.000
[+] Staging objects : BOTH_RIGHT
[+] Union between : Coin Cargo Ship.000 & Dodecaeder
[!] Number of faces #1 : 92346 + number of faces #2 : 7836 = 100182
[!] Number of faces of union: 95873
[+] Cleaning non manifold
[!] Total removed V: -0.00%, E: -0.01%, F: 0.00%

[+] Getting object #16
[<] Importing : downloads/446328/biohazard_spray-paint_template.stl
[+] Cleaning non manifold
[!] Total removed V: 0.00%, E: 0.00%, F: 0.00%
[+] Preparing : Biohazard Spray-Paint Template
[+] Rotating object = Biohazard Spray-Paint Template
[!] Volume difference is 3.45%
[+] Scaled Biohazard Spray-Paint Template by 142.61%
[+] Created duplicate : Coin Cargo Ship.001
[+] Staging objects : BOTH_TOP
[+] Union between : Coin Cargo Ship.001 & Biohazard Spray-Paint Template
[!] Number of faces #1 : 95873 + number of faces #2 : 1440 = 97313
[!] Number of faces of union: 96809
[+] Cleaning non manifold
[!] Total removed V: -19.03%, E: -16.25%, F: -14.62%
[-] Object is malformed
[-] Union did not work well. Discarding object.

[>] Exporting STL to : /uploads/20170527-1753-46

More from Art

view more

All Apps

Auto-magically prepare your 3D models for 3D printing. A cloud based 3D models Preparing and Healing solution for 3D Printing, MakePrintable provides features for model repairing, wall thickness...

App Info Launch App

Kiri:Moto is an integrated cloud-based slicer and tool-path generator for 3D Printing, CAM / CNC and Laser cutting. *** 3D printing mode provides model slicing and GCode output using built-in...

App Info Launch App
KiriMoto Thing App

With 3D Slash, you can edit 3d models like a stonecutter. A unique interface: as fun as a building game! The perfect tool for non-designers and children to create in 3D.

App Info Launch App

Print through a distributed network of 3D printing enthusiasts from across the US, at a fraction of the cost of the competitors. We want to change the world for the better through technology, an...

App Info Launch App

Treatstock is an online platform that offers decentralized manufacturing services such as 3D printing and CNC machining for clients all over the world. We offer free and instant access to comparati...

App Info Launch App

3D print your favourite design with NinjaPrototype, a professional 3D manufacture with consistent quality and speed.

App Info Launch App
Top