Turnigy Talon Quad Copter Landing Gear
by curseddagger, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Simple replacement landing gear for a Turnigy Talon V2 carbon fiber quad copter. I found that the original parts were very easy to break, even from a soft landing and they around $10 to replace to i had to find a cheaper alternative.
If you print it at a medium infill (50%) it's flexible enough to absorb a bit of impact without breaking.
Should work well with http://www.thingiverse.com/thing:162908 if you drill a small pilot-hole and use a self tapping screw
nice easy print, 50% infill to add a bit of flex but still strong. i printed with 3 shells but it really doesn't matter.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Turnigy Talon Quad Copter Landing Gear by curseddagger is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving curseddagger a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure curseddagger would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).