Kossel Roller Carriage

by krapouere Jan 27, 2014
Download All Files

Thing Apps Enabled

Please Login to Comment

Great design! It is exactly what I was looking for.
I've just bought these rollers:


Anyway, with the GT2 belt how have you reunited the belt ends?

Thank you very much!
I adapted the size a little for 21mm rollers (bought via aliespress). Works like a charm.

Where did you get the rollers Krapouere?

Any chance you have a link, i'd like to give them a go :)

I also supply similar rollers for 15x15 profiles (OpenBeam) in case you need any more. You can find them at: http://www.builda3dprinter.euhttp://www.builda3dprinter.eu
Direct link: http://www.builda3dprinter.eu/shop/parts/v-roller/www.builda3dprinter.eu/shop/pa...

Is this for the 1515 or 2020 profile extrusions?

it's for 15x15 profile.

Any chance You will make it for 2020?

Any chance You will make it for 2020?

Any chance You will make it for 2020?

Hi. I cannot find Width of the wheel : 5.5mm. All items on ebay are 5mm or 6mm depth. For example http://cgi.ebay.it/ws/eBayISAPI.dll?ViewItem&item=281037061302&fromMakeTrack=true&ssPageName=VIP:watchlink:top:ithttp://cgi.ebay.it/ws/eBayISAP...
Can you give me an example of roller witch you bought.

I don't really remember, but I think that my rollers were 6mm depth according to the ebay description, but I measured 5,5mm with a caliper.
Even if your rollers are 5 or 6mm depth, I think it will work.

Update with new pictures & video of the carriages

I forgot to upload the STL files... That's fixed !

Notice that I never test this carriage on my Kossel.
Because I didn't order enough rollers for the all printer (I wanted to try because order 9 rollers...).

I planned to have the 3 carriages ready to test for the end of February, not before.
So I will keep you informed of my results later.