An flip up sight, styled on the looks of the
Magpul MBUS flip-up. Few things still to be
developed (height adjustment, rear sight analog
part, torsion spring), but should work just fine.
As soon as i get the part from e-prototypy, i'll
post some pics.
- printed parts (duh)
- 2x 2.5mm x 25mm steel pin
- hexagon socket m3x30 screw
- an ISO 4035 M3 nut
- small rubber band
- 10mm dia 10mm height coil spring
Assembly is quite simple. Attach the release to
the bottom piece with the 2.5mm steel rod, put
the large spring under it, press it down and
attach the sight with the second rod. Last, place
the rubber band into the notches on the side and
bottom piece. To mount the sight on the rail,
slide it on, put in place, insert the nut into
the right side socket, then put the screw into
the other-side hole, and screw in tightly.