This is an adapter to mount the Highsider Satellite Headlights to the stock mount of the Buell XB Firebolt models.
The original ellipsoid headlights of the Buell Firebolt models have a low light output and tend to get even darker over time as the mirrors inside the lights turn dark grey.
Therefore a replacement was needed.
In the German XBORGFORUM there was a thread about LED Headlights used in a show bike built by Dirty Harry.
Those LED Headlights have about the right size to fit into the stock mask of the Buell Firebolt models. Additionally the lights have an European ECE-certification (high and low beam) so even by strict German law they are street legal.
(There is no integrated parking light. To make the whole bike street legal again you need to add a parking light with ECE-certification. See my pics or the XBORGFORUM for ideas)
By using the stock mount the beam adjuster can still be used.
I bought the lights at Louis in Germany but they are also available at other stores:
Louis Highsider Satellite low beam
Louis Highsider Satellite high beam
Printed in PLA for testing.
Final version was printed in PETG and coated with some black color.
You need to print two different mounts as the high and low beam lights don't have the same diameter.
PLA is brittle and doesn't like water and sun light too much. Therefore it would probably be better to print the thing in PETG/ABS or apply some coating to the PLA afterwards.
Remove the mount delivered with the lights.
Use the screws to secure them into the printed mounts.
Screw the mounts onto your bike and attach the cables.
If you live in Europe and want it street legal: Don't forget the parking light!