0.4mm layer height and nozzle
Ive added G code made with Cura, finetuned for K8200 with 0.4mm nozzle and PLA.
There is support wich breaks off eazy, print time is 2.3hours.
Brim is set to 15mm and part is rotated 45° around Y axis.
Heatbed temperature is 50%, parts cooling fan must be on for good print.
The holes might need to be drilled once, dont drill the mount holes of the main part,
tap them with a M6 tap.
My steps per mm for the original velleman extruder are set to 625 per mm, sightly overextruding for super layer adhesion.